Drayton mistat1/29/2024 The cable entry strip on the bottom edge of the wallplate with a pair of pliers. Loosen the securing screws, remove the wallplate and, if surface wiring is to be used, snap out It is recommended that the MiStat R is mounted on the wall nearest the fi nal location of the MiStat P room unit and not less than 30cm from the boiler side panel. For the best performance install in an open space, at least 30cm distance from any metal objects including wall boxes and the boiler housing. The ideal location is close to the boiler or central heating system. Make sure mains input has a 3 amp fuse.ĬAUTION! Before installation, make sure the mains supply is switched off! Installation must only be carried out by a qualifi ed electrician or heating engineer. Instructions Step 1: Mounting the Wall-plate This electronic device was created according EN60730-1, it operates according working principle 1C. This radio receiver, which can be installed separately, is designed exclusively for temperature control in dry and closed rooms and standard environments. In order to achieve protection class II, adequate installation measures must be taken. The current safety regulations must be observed. The radio receiver may be installed only by a competent electrician in compliance with the circuit diagram enclosed in the top housing cover or in compliance with these instructions. Note: To ensure a properly working heating system, the menu items in the Installer settings have to be set according to the needs of the heating system, see step 5. Actuators of fl oor heating systems or radiatorsĪ MiStat R receiver is required for operation.The electronic room thermostat MiStat P can be used for temperature control together with: 5 Reference Drayton P710R Programmable Room Thermostat Applications
0 Comments
Leave a Reply.AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |